KOVEA P-Adapter with safety valve KA-1004
This Kovea made P-Adapter adapter allows you to use low-cost puncture-type gas canisters with stoves that have a 7/16″-28 UNEF thread. Once the canister is attached to the adapter, it cannot be removed until it is empty. However, you can still detach the stove from the adapter.
To use the adapter, follow these steps:
-
- Place the Adapter: Position the unfolded adapter on top of the canister.
-
- Secure the Wings: Press down the adapter’s „wings“ and secure them under the canister.
-
- Attach the Rubber Ring: Fit the rubber ring onto the lower part of the canister to ensure a tight seal.
-
- Puncture the Canister: Carefully turn the black plastic upper attachment until the canister is punctured.
-
- Attach the Stove: Now, thread your stove onto the adapter’s 7/16″-28 UNEF thread.
At this point, the canister is securely connected to the adapter, and your stove is ready for use. Remember, the canister cannot be removed from the adapter until it is empty.
The adapter is available at Mercator Gear https://mercatorgear.com/product/kovea-p-adapter-with-safety-valve-for-puncture-type-gas-canisters/ Puncturecans can be purchased at several shops incudung diy stores which sell bbqs.
